The unit is very solid, heavy duty, and overall works well
But there are some issues
The mounting bolt holes have very tight tolerances, and on my unit, the plastic protection inserts were every so slightly offset so the mounting bolts would not pass through the holes properly.
I had to undo the screws of the pads slightly so the bolts would go through, but in the process ending up stripping a few of the screws...
Thankfully I won't need to ever undo them, but it's something I should not have to do if they even tested the bolts at the factory....
The kick stand is also too short if you use the belt on the shortest setting to be able to hit full ATG depth on the squat.
It means you have to kneel down to hook the belt up.
I had to buy some car jack stands to prop up the lever arm, sitting under the front rubber pad, so I can start from the top. With just a 1/4 squat needed to hook the belt up.
The bottom half of the kick stand grinds against the lever arm when it flips up as you lift off. It could use some rubber protection there as well
If these issues were not present I would rate it much higher as it's better than a lot of the alternatives out there